With the Medusa Research Thrust Cell you will
no longer have to guess as to how much thrust
your propulsion system is producing. This precision
instrument interfaces directly to the Power Analyzer
Pro measurement system to provide a seamless integration
between the relationship of thrust to current,
voltage, and power. You can create a detailed
characterization of your complete power system
as well as the individual components. No longer
will you have to rely on information or data of
unknown origin. Know exactly what the relationship
is between power and thrust for your specific
propeller and generate prop constants for the
popular simulation programs.
The Medusa Research Thrust Cell is the perfect
addition to complete your power system measurement
package.
 |
5000g
(11 lbs.) capacity |
0.5g |
0.1%
of reading ±1 count |
1g |
-10°C
to 45°C |
20cm
x 14.2cm x 5.8cm |
14cm
x 12cm |
Power
Analyzer Pro |
|
|
 |
 |
 |
|
EUropean
adapter |
UK
adapter |
For use in:
Australia
China
Fiji
|
For
use in:
Europe
|
For
use in:
United Kingdom
Hong Kong
Malaysia
Singapore |
Input:
240V |
Input:
230V |
Input:
240V |
The Medusa Research RPM sensor interfaces
directly to the Power Analyzer Pro measurement
system.
This sensor has convenient threaded mounting bosses
to allow you to mount the sensor to your motor
test stand. It contains a built in light source
that will operate in normal room lighting, either
incandescent or fluorescent. No more fumbling
around in a dark room with a flashlight next to
a rotating propeller.
With the Medusa Research RPM sensor you now have
a hands free approach to prop RPM measurement.
Simplify your test stand and in-flight testing with the
Brushless Motor RPM Phase Sensor for the Power Analyzer PRO and Oracle.
This reasonably priced sensor is a must-have accessory for brushless
motor testing. It works in place of our optical RPM sensor (MR-RPM-001),
and it is compatible with all existing Power Analyzer PRO and Oracle
hardware.
To use the sensor connect the provided hassle-free bullet-type connector tap-in
to your existing motor connectors without soldering, splicing, or piercing the
wire insulation. Only one connection is required to any one of the three wires
going to the brushless motor. Installation with other types of connectors is also
easy with the single lead construction of the sensor. Then using the PowerProview
software, configure your unit to select the RPM Phase Sensor and set the number
of “motor poles” and you're ready to measure RPM!
The Medusa Research Temp sensor
provides a simple way to monitor the temperature
of the components in your power system. Are you
trying to pull too much current from your batteries?
Overloading your motor? With the Medusa Research
Temp sensor and the Power Analyzer Pro you will
know the answer.
The Medusa Research Temp sensor
provides a simple way to monitor the temperature
of the components in your power system. Are you
trying to pull too much current from your batteries?
Overloading your motor? With the Medusa Research
Temp sensor and the Power Analyzer Pro you will
know the answer.
The Data Memory Module increases
the versatility of the Power Analyzer Pro to a
new level. By mounting the Power Analyzer Pro
with the Data Memory Module in your model you
can now monitor the in flight performance of your
propulsion system. Measure the difference in current
and power when the model is stationary or moving.
Record how hot your motor, esc or battery is getting
when installed within your craft. The Data Memory
Module stores over four minutes of data or longer
depending on the configuration. You can download
and display this data on your PC using the PowerPROview
and Power Analyzer Pro at a later time.
The Data Memory Module is the
perfect addition to your Power Analyzer Pro so
have one in your flight kit.
Deans Ultra Connector Set includes
one male connector, one female connector and tubes
of heatshrink for insulation. This kit allows
you to prepare your Power Analyzer to connect
to batteries, battery chargers, and ESCs.
This kit includes everything from
the above Deans Ultra Connector Set kit. The only difference is
we solder it on the Power
Analyzer for you.
* Power analyzer not included. |
|
This page last updated on
Friday, March 1, 2008
Copyright © 2002 - 2008 Medusa Research.
All rights reserved.
Temperature Sensor (without mounting lug): MR-TEMP-002
